DNT Young446 plus Notice D'utilisation page 41

Low power
If you use the Young446 plus only over short distance, we recommend to
use low power. To select low power proceed as follows:
To change back to normal power proceed as follows:
Receiving
Channel selection
The Young446 plus offers 8 channels in the PMR band.
All manuals and user guides at all-guides.com
Mic. Icon.
4. Press the OK button to confi rm.
5. Use the Up-/Down button to select between 4
levels.
6. Press the OK button to confi rm.
1. Press the Up-/Down button until PS on? appears on
the display.
2. Press the OK button to confi rm.
3. appears on the display.
1. Press the Up-/Down button until PS off? appears
on the display.
2. Press the OK button to confi rm.
If the radio detects a valid signal in the selected chan-
nel, the receiving indicator appears, but the speaker
is only activated when the CTCSS code matches or is
switched off.
- 41 -
General operation