DNT Young446 plus Notice D'utilisation page 40

General operation
When the transmitting starts, a beep tone is heard, at the
end of transmission two beeps are heard.
To enable VOX mode proceed as follows:
To turn off the VOX mode proceed as follows:
VOX sensitivity
The VOX sensitivity is adjustable in 4 steps.
To change the VOX sensitivity proceed as follows:
All manuals and user guides at all-guides.com
1. Press the Up-/Down button until VOX appears on
the display.
2. Press the OK button to confi rm.
3. Use the Up-/Down button to move the arrow to on .
4. Press the OK button to confi rm.
In the upper left corner of the display you can see a
icon for VOX mode.
1. Press the Up-/Down button until VOX appears on
the display.
2. Press the OK button to confi rm.
3. Use the Up-/Down button to move the arrow to
off .
4. Press the OK button to confi rm.
1. Press the Up-/Down button until VOX appears on
the display.
2. Press the OK button to confi rm.
3. Use the Up-/Down button to move the arrow to
- 40 -