DNT Young446 plus Notice D'utilisation page 37

Both radios must be on the same channel and
CTCCS tone (ref. Channel selection and CTCSS
code ).
Adjust the parent unit to max. volume otherwise
you may not hear the baby crying.
On the baby monitor mode the CTCSS tone can't
be switched off.
All presetting can be changed individually (ref.
General operation ). With Reset function all
individual settings can be reset to the delivery
status.
Out of range function
Low power
If you use the Baby monitor only over a short distance (at your fl at) we
recommend to use low power on the baby unit. To select low power
proceed as follows:
All manuals and user guides at all-guides.com
3. Following settings are made:
Vox is off
Out of range function is on
Out of range alarm is on
On baby monitor mode every 8 seconds the radios
check if the baby unit is within the receiving range of the
parent unit. Is the baby unit out of range for more than
60 seconds, the
the parent unit has an acoustic alarm. As soon the units
are in range the
1. Press the Up-/Down button until PS on? appears on
the display.
- 37 -
Baby monitor
icon appears on the display and
icon disappears on the display.