Publicité
Les langues disponibles
Les langues disponibles
KEEP MACHINE CLEAN
Periodically blow out all air passages with dry compressed
a i r. All plastic parts should be cleaned with a soft damp cloth.
NEVER use solvents to clean plastic parts. They could
possibly dissolve or otherwise damage the material.
Wear ANSI Z87.1 safety glasses while
using compressed air.
L U B R I C AT I O N
Apply household floor paste wax to the
extension table or other work surface weekly.
PARTS, SERVICE OR WARRANTY ASSISTANCE
All Delta Machines and accessories are manufactured to high quality standards and are serviced by a network
·
of Porter-Cable
Delta Factory Service Centers and Delta Authorized Service Stations. To obtain additional
information regarding your Delta quality product or to obtain parts, service, warranty assistance, or the location
of the nearest service outlet, please call 1-800-223-7278 (In Canada call 1-800-463-3582).
A complete line of accessories is available from your Delta Supplier, Porter-Cable · Delta Factory Service Centers,
and Delta Authorized Service Stations. Please visit our Web Site
the name of your nearest supplier.
with this product, use of such accessories could be hazardous. F o r s a f e s t o p e r a t i o n, only
Delta recommended accessories should be used with this product.
All manuals and user guides at all-guides.com
M A I N T E N A N C E
machine
table and
S E RV I C E
ACCESSORIES
Since accessories other than those offered by Delta have not been tested
PROTECTING CAST IRON FROM RUST
To clean and protect cast iron tables from rust, you will
need the following materials: 1 pushblock from a jointer, 1
sheet of medium Scotch-Brite™ Blending Hand Pad, 1
can of WD-40
®
, 1 can of degreaser, 1 can of To p C o t e
Aerosol. Apply the WD-40 and polish the table surface
with the Scotch-Brite pad using the pushblock as a
holddown. Degrease the table, then apply the To p C o t e
a c c o r d i n g l y.
www.deltamachinery.com
21
®
®
for a catalog or for
Publicité
