Bresser Climate Monitor Mode D'emploi page 22

1.
2.
3.
10 Manual time adjustment
1.
2.
3.
4.
5.
6.
NOTICE! For more information on the time display in 12- or
24-hour mode, see the chapter "Changing the display".
11 Automatic measurement display
Once the power is established, the readings for the current
environment are displayed on the unit.
12 Clima indicator
1
3
The climate indicator is a visual display based on air temper-
ature and humidity to determine the level of comfort.
22 / 72
Press the RCC button for approx. 2 seconds to initiate
the reception of the radio signal again.
If still no radio signal is received, the time must be set
manually.
To deactivate automatic reception of the time, press
and hold the RCC key for approx. 3 seconds.
In normal display mode, press the SET button for about
3 seconds to enter the time settings mode.
Digits to be set are flashing.
Press UP or DOWN button to change the value.
Press the SET button to confirm and switch to the next
setting.
Sequence of the settings: Time offset > Hours >
Minutes > Year > Month > Day
Finally, press the SET button to save the settings and
exit settings mode.
DRY: dry (humidity <40%)
WET: Humid (humidity
>70%)
2 COMFORT: Optimal (humid-
ity between 40% and 70%)