Bresser Climate Monitor Mode D'emploi page 21

7 Screen display
Illustration 2: Display indications for the thermo-hygrometer
11 AM/PM information
(only in 12-hour time mode)
13 Temperature (°C or °F selectable) 14
15 Symbol for daylight saving time
(only for summer time)
17 RCC symbol (only when radio-
controlled clock is enabled)
8 Setting up power supply
1.
2.
3.
9 Automatic time setting
After the power has been restored, the unit automatically
searches for the radio signal. It takes approximately 3-8
minutes for this process to be completed.
If the radio signal is correctly received, the date and time
are set automatically and the reception symbol is displayed.
If no radio signal has been received, proceed as follows:
11
12
13
Remove the battery compartment cover.
Insert battery(ies) into the battery compartment. En-
sure that the battery polarity (+/-) is correct.
Replace the battery compartment cover.
12 Climate indicator
Humidity ( in % )
16 Time (hours : minutes)
17
16
15
14
21 / 72