Publicité
Les langues disponibles
Les langues disponibles
Nature Mode:
Designed to replicate natural and varying
wind speeds:
•
With fan speed set to LOW: The fan will
spend 5 seconds at LOW power and 5
seconds off and repeat.
•
With fan speed set to MID: The fan will
spend 5 seconds each at MID, LOW,
MID, STOP, LOW, MID, LOW, STOP and
repeat.
•
With fan speed set to HIGH: The fan will
spend 5 seconds each at MID, LOW,
HIGH, MID, HIGH, LOW, HIGH, STOP
and repeat.
Sleep Mode:
This was designed to use the effects of
Nature Mode to fall asleep. It will gradually
decrease the speed of the fan in 30 minute
increments:
•
With fan speed set to LOW: The fan will
run the same as LOW Nature Mode
•
With fan speed set to MID: The fan will
spend 30 minutes at MID Nature Mode
then switch to LOW
•
With fan speed set to HIGH: The fan will
spend 30 minutes at HIGH, 30-mins at
MID and then switch to LOW.
Tip: If you would prefer a constant fan speed
whilst sleeping, we recommend setting the
fan to NORMAL mode and selecting speed
as LOW. Use the timer function to set the
fan to switch off after an elapsed time (e.g. 1
hour after going to bed).
5 | English
OPERATING THE FAN USING THE
REMOTE CONTROL
―
•
To start using the remote control to
operate the fan, slide out the battery tray
and insert 1x CR2025 battery. Replace
tray.
•
The remote control functions in the
same way as the control panel and
should be used as such.
•
The effective range of the remote
control is 5m from the fan and should
be directed towards the front of the fan
when in use.
MODE
SPEED
OSC
TIMER
Functions:
•
Press the oscillating button
activate or deactivate the oscillating
function.
•
When active, the fan will turn slowly to
70° and back again.
•
Press the speed button
the air speed between high, medium
and low.
•
Press the mode button
one of the three types of breeze.
•
Press the timer button
length of time the fan should operate for.
Battery
to
to adjust
to select
to select the
Publicité
