CYBEX gold ETERNIS S Mode D'emploi page 88

6
88
USING CHILD RESTRAINT
WITH LAP BELT
CLICK!
FORWARD-FACING
Locate tether anchor in your vehicle. Attach
6
tether hook. Pull tether adjuster strap to
tighten.
CHECK YOUR WORK
MAKE SURE the belt is tight and locked. If
you can move the child restraint more than
2.5 cm (1 in.) side to side or front to back at
the FORWARD-FACING
belt is not tight enough.
Re-check recline level, pg. 84.
If you have not tightly secured the child
restraint, try again or:
• lock the vehicle retractor
• move it to another location
• or install with the lower anchor strap.
To remove seat, unbuckle the vehicle seat
belt.
belt path, the vehicle