CYBEX gold ETERNIS S Mode D'emploi page 82

7
82
USING CHILD RESTRAINT
WITH LAP/SHOULDER BELT
CLICK!
FORWARD-FACING
Locate tether anchor in your vehicle. Attach tether
7
hook. Pull tether adjuster strap to tighten.
CHECK YOUR WORK
MAKE CERTAIN the belt is tight and locked. If you can
move the child restraint more than 2.5 cm (1 in.) side
to side or front to back at the
path, the vehicle belt is not tight enough.
Re-check recline level, pg. 78.
If you have not tightly secured the child restraint, try
again or:
• lock the vehicle retractor
• move it to another location
• or install with the lower anchor strap.
If your shoulder belt still needs to be tightened, you
may need to refer to page 23, Seat Belt Warnings, to
determine the type of vehicle belt in your vehicle and
how to lock it.
To remove seat, unbuckle the vehicle seat belt.
FORWARD-FACING belt