Publicité
Les langues disponibles
Les langues disponibles
installation of sauna room body
1. Place the floor panel in the desired location on a level surface.
NOTE - The floor panel must be level before installing wall and ceiling
panels. If the surface is not level you may need to shim the bottom panel to
get level.
Make sure lines/grooves of the flooring of the floor panel are parallel with
the front wall.
2. Place back panel in the slot of floor panel.
3. Place the left side panel in the slot of floor panel.
6
userguide_SAU_1510-H.indd 6
28/08/07 14:50:40
Publicité
