Publicité
Les langues disponibles
Les langues disponibles
4. Place the right side panel in the slot of floor panel.
5. Place the bench support panel first and then place the bench surface
panel into the sauna room.
On larger sauna rooms with more than one bench, rotate the wooden bench
supports away from the side walls.
Slide the bench support panel down the wooden supports with the heater
facing out.
Make sure the two side slots of the bench support panel slide completely
into the corresponding grooves of the wooden supports. (picture 1)
Connect the power connector from the back of bench support panel to the
right wall panel. Ensure the connection is completely fastened; attach cover
with the provided screws. (picture 2)
Connect the power connector from floor panel to the bench support panel.
Ensure the connection is completely fastened (picture 2)
Place the bench surface panel on the bench support panel and slide toward
the back wall until flush to the back wall. (picture 3)
picture 1
picture 2
picture 3
7
userguide_SAU_1510-H.indd 7
28/08/07 14:50:41
Publicité
