Publicité
Les langues disponibles
Les langues disponibles
6. Place the front panel in the slot of floor panel.
7. Place the top panel on the four side panels. Make sure the connection
wires from the three side panels protrude through the corresponding holes
of the top panel. Make sure the top panel's with fluorometry is facing to
the front. (picture 1) Make sure the wire is through each hole smoothly and
completely. (picture 2)
Make sure trim of the top panel fits completely around the four side panels.
(picture 3-4)
picture 1
picture 2
picture 3
picture 4
8
userguide_SAU_1510-H.indd 8
28/08/07 14:50:41
Publicité
