Télécharger Imprimer la page

Warn 78164 Instructions D'installation page 5

Publicité

Les langues disponibles

Les langues disponibles

VI. INSTALLATION
1. If Warn Body Armor Kit PN 78164 is already
installed, skip to step (7).
2. Remove factory skid plates if applicable.
3. Place middle skid plate (A2) on vehicle. Use clamps
to temporarily hold skid plate in place. Align skid
plate side to side with vehicle frame. See Figure 1.
Note: Use caution to ensure skid plate will not pinch
wire harness when installed. Adjust wire
harness position so skid plate does not pinch
harness
4. Place rear skid plate (A3) on to vehicle. Align skid
plate with middle skid plate (A2) and vehicle frame.
Use clamps to temporarily hold skid plate in place.
See Figure 2.
WARN INDUSTRIES
©2007 Warn Industries, Inc.
WARN® and the WARN logo are trademarks of Warn Industries Inc.
PAGE 5
Figure 1
Figure 2
Figure 3
78165A1

Publicité

loading

Ce manuel est également adapté pour:

78342