Assembly - Skil LT4823B-00 Guide D'utilisation

ASSEMBLY

WARNING
parts, making adjustments, cleaning, or when not in use .
WARNING
could result in serious personal injury.
WARNING
is misuse and could result in a hazardous condition leading to possible serious injury.
Unpacking
This product requires assembly.
•
Carefully remove the product and any accessories from the box. Make sure that all items
•
listed on the box are included.
Inspect the tool carefully to make sure that no breakage or damage occurred during
•
shipping.
Do not discard the packing material until you have carefully inspected and satisfactorily
•
operated the tool.
If any parts are damaged or missing, please return the product to the place of purchase.
•
Tools needed for assembly/
maintenance
Screwdriver with PH2 Philips head
(not supplied)
Impact driver mounted with 14mm socket
(not supplied)
Unfold the Shaft
WARNING
not hold the shaft at the joints .
WARNING
has been locked .
1. Remove the battery pack from the trimmer.
2. Put your trimmer on the ground and care-
fully unfold the shaft. Make sure that the
cable is inside the shaft so that it will not be
pinched when closing the joints (Fig. 2).
3. Use a phillips head screwdriver (not sup-
plied) to lock the shaft with the two bolts
supplied (Fig. 3).
To prevent accidental starting that could cause serious personal
injury, always remove the battery pack from the tool when assembling
If any parts are damaged or missing, do not operate this product until
the parts are replaced . Use of this product with damaged or missing parts
Do not attempt to modify this tool or create accessories not
recommended for use with this tool . Any such alteration or modification
In order to avoid pinching
your hands or fingers, do
Do not attempt to start
the trimmer until the shaft
Fig. 2
Fig. 3
11