PURE Sensia 200D Connect Mode D'emploi page 20

Listening to audio from a USB memory stick
Sensia can be used to play music by connecting a USB memory stick to the USB port on the back of Sensia.
The audio file types that Sensia supports include WMA (Standard V9), AAC, MP3 and MP2. By default, Sensia
looks for audio on your network if you have not connected a USB memory stick to the back of Sensia.
Network/USB media
Streaming audio from a Media Server
You can stream music stored on your computer or on a UPnP-compatible Network Attached Storage device
to Sensia. To stream music from your computer you will need to install media server software on it.
Controlling audio playback
If you are streaming audio on Sensia from either a USB memory stick or Media Server, you can control the
playback using the remote or on Sensia as follows:
1. Tap the Play icon in the information panel.
2. You will now be able to play, pause and skip tracks by clicking the respective icons.
18
All manuals and user guides at all-guides.com
To listen to tracks from a USB memory stick:
1. Tap Source.
2. Tap Network/USB media.
3. Wait while Sensia searches for available media servers.
4. The list panel will display a list of the media servers that have been
found on your network.
5. The contents of your USB memory stick will be shown.
6. Navigate to your tracks and tap to play.
To listen to tracks from a media server, ensure that Sensia is in Browse
view and carry out the following:
1. Tap Source.
2. Tap Network/USB media.
3. Wait while Sensia searches for available media servers.
4. The list panel will display a list of the media servers that have been
found on your network.
5. Tap the server that you want to connect to.
6. Navigate to the area where the audio is located.