Télécharger Imprimer la page

Yakima HoldUp Instructions D'installation page 3

Masquer les pouces Voir aussi pour HoldUp:

Publicité

Les langues disponibles

Les langues disponibles

Fold holdup down.
• Remove pin and safety clip.
• Fold down holdup
• Replace pin and safety clip.
prepare For loadIng.
Release wheelstrap
by pressing the lever
on the buckle.
Tuck strap into
slot at rear of
whelltray.
swIng pIvot arm Into place.
Rotate the pivot arm
up until the hook
rests on the bike tire
1" from the brakes.
1033435E-3/15
All manuals and user guides at all-guides.com
load heavIest BIKe FIrst.
CAUTIon:
If any part of your bike
comes in contact with
the red trigger, do not
use this carrier with
that bike.
Fold pIvot arm down.
secure the hooK.
Compress the
hook against
the wheel by
applying firm
pressure.
be sure pivot arm
is folded down.
Make sure your
tires are filled to
recommended
pressure found
on the tire.

Publicité

loading