No change in measurements if
connected with the drain illustrated.
(K-11677 or K-11677M)
20"
(50.8 cm)
3-1/8"
(7.9 cm)
8" (20.3 cm)
60" (152.4 cm)
2-1/2"
(6.4 cm)
Product Information
Applicable product:
Oval bath whirlpool with heater – drop-in rim
style
Fixture*:
Bathing well:
Basin area, bottom
Basin area, top
Weight
To overflow:
Water depth
Capacity
* Approximate measurements for comparison only.
Pump:
1-speed
Heater:
kw
1.5
Included components:
Cut-out template
Recommended accessories:
Adjustable trip lever drain – through-the-floor
installation
1013782-1-C
All manuals and user guides at all-guides.com
1" (2.5 cm)
2-7/8" (7.3 cm) 3/8" (1 cm)
3" (7.6 cm)
K-1146-H
46" (116.8 cm) x
19" (48.3 cm)
55" (139.7 cm) x
29" (73.7 cm)
61 lbs (27.7 kg)
14" (35.6 cm)
54 gal (204.4 L)
V
Hz
A
120
60
7.5
V
Hz
A
120
60
12.5
K-11677
5/8" (1.6 cm)
29" (73.7 cm)
26" (66 cm)
20" (50.8 cm)
1" (2.5 cm)
4" (10.2 cm)
5" (12.7 cm)
10" (25.4 cm)
9"
(22.9 cm)
1-1/4" (3.2 cm)
Drain End
2 Required
Pump/Control
Access Panels
17-5/8"
16-1/8"
(44.8 cm)
(41 cm)
Required Electrical Service (2 required)
Two dedicated circuits required, each protected with Class A
Ground-Fault Circuit-Interrupter (GFCI):
Pump/control
Heater
Notes
Install this product according to the installation guide.
Floor support under this product must provide for a minimum of
33 lbs/square foot (158 kg/square meter) loading.
The suction line extends 1" (2.5 cm) beyond the edge of the rim.
The pump base extends 1-1/8" (2.9 cm) beyond the edge of the
rim. Modify the framing as needed.
Two minimum access panels are required as illustrated. These
should be 20" (50.8 cm) wide and 15" (38.1 cm) high.
This fixture conforms to ANSI Standard Z124.1.2. All dimensions
are nominal.
114859-7
2
29-3/4" (75.6 cm)
28" (71.1 cm)
20" (50.8 cm)
10" (25.4 cm)
Symmetrical About C L
Cut-Out Detail
40" (101.6 cm)
1-1/2" OD
1" (2.5 cm)
4" (10.2 cm)
6" (15.2 cm)
8" (20.3 cm)
1-1/2"
(3.8 cm)
Drop-In
Rim Detail
120 V, 15 A, 60 Hz
120 V, 15 A, 60 Hz
Kohler Co.