Axis Q6034 Instructions D'installation page 21

AXIS Q6034 Installation Guide
Unit Connectors
Network connector – RJ-45 Ethernet connector. Supports High PoE (Power over Ethernet, class 4).
Use AXIS T8123 High PoE Midspan 1-port (included). Shielded cables should be used to comply
with EMC.
Multi-connector – Terminal connector for connection of external equipment:
• Audio equipment
• Input/output (I/O) devices
• AC/DC power supply
When connecting external equipment to AXIS Q6034, a multi-connector cable is required in order
to maintain the IP52 rating. The multi-connector cable can be purchased from your Axis reseller.
For more information, please see the User's Manual available from the AXIS Network Video Product
CD supplied with this product or from the website at www.axis.com
SDHC card slot – A standard or high capacity SD card (not included) is required to store images
locally in the network camera. To insert and remove the SD card, the dome ring and the dome cover
Install an SD card (optional),
must be removed, see
Note:
Before removal, the SD card should be unmounted to prevent corruption of recordings. To
unmount the SD card, go to Setup > System Options > Storage > SD Card and click
Unmount. For more information, please see the User's Manual available from the
AXIS Network Video Product CD supplied with this product or from the website at
www.axis.com
All manuals and user guides at all-guides.com
on page 8.
Page 21