Publicité
Les langues disponibles
Les langues disponibles
Do not use the appliance with a timer or a programmer or with a system that can switch on the
appliance automatically, to avoid risk of fire, since a fire risk exists if the heater is covered or
positioned incorrectly.
In the event of a breakdown or poor operation, turn the fan heater off and ask for professionally
qualified help.
ASSEMBLY INSTRUCTIONS (see Fig.1)
Attention: the fan can be used only when completely and correctly assembled, that is complete with
its base and support and protection grid. If in doubt, have the appliance checked or assembled by a
qualified professional person. For assembly, refer to fig. 1.
Stand assembly
1.
Secure the pole (D1) to the base (C) by inserting it into its seat with the washer in between, and
secure it with the screw (E).
2.
Pull out the adjustable pole (D2) up to the desired height, and secure it with the blocking screw
(B).
Fan assembly
1. Insert the rear grille (7) onto the motor body (10), and centre it so that the pins enter their
corresponding holes; secure with lock-ring provided (6).
2. Fit the fan (5) onto the motor shaft (9) and check that it engages correctly; secure with the lock-
ring provided (4) (turn anticlockwise).
3. Couple the front grille (1) to the rear (3) and fix it using the screw and nut provided (2) present on
the plastic ring of the front grille.
4. Fit the fan to the stand, and secure it by tightening the fixing screw of the motor body (A).
Fig.1
1.
Grille securing screw
2.
Front grille
3.
Handle
4.
Fan attachment ring nut
5.
Fan
6.
Feet attachment screw
7.
Rear grille
9.
Motor shaft
10. Front motor casing
11. Rear motor casing
12. Oscillation button
13. Fan knob
14. Non-slip seal
A-Body attachment screw
B-Pole blocking screw
C-Base
D1- Fixed pole
D2- Adjustable pole
E- "L" shaped screw with washer
USE
Plug the fan in the power supply.
7
16
/
Publicité
