Kingston Technology DataTraveler Locker+ G3 Manuel D'utilisation page 5

Setup (Windows Environment)
1. Insert the DTL+ G3 into an available USB port on
your notebook or desktop and wait for Windows
to detect it.
 Windows 11/10 users will receive a device
driver notification as seen in
Once the new hardware detection is complete,
Windows will begin the initialization process.
 If the Windows autorun function is enabled,
you can skip the next step and go to page 5 –
Device Initialization.
 You may see an AutoPlay window similar to
the one in
Figure 2.2
2. Select the option '
If Windows does not AutoPlay, simply browse to the
DVD-RW partition (
the DTLplus_Launcher program. This will also start
the initialization process.
Figure 2.3 – DTL+ G3 Contents
Document No. 480G3001-001.A06
Figure 2.1
.
Run DTLplus_Launcher.exe
) and manually execute
Figure 2.3
DataTraveler
.
Figure 2.1 – Device Driver Installation
(
Note: Menu options in the AutoPlay
window may vary depending on what
programs are currently installed on
'.
your computer. If enabled, AutoRun
will start the initialization process
automatically.
® Locker+ G3 USB-to-Cloud
Figure 2.2 – AutoPlay Window
)
Page 4 of 28