Kingston Technology DataTraveler Locker+ G3 Manuel D'utilisation page 17

3. Create a password to protect your data on the DTL+ G3. Enter it in the 'Password' field, then re-
enter it in the 'Password Confirmation' field, as seen below in Figure 7.3. The password you create
must meet the following criteria before the initialization process will allow you to continue:
1. Passwords must contain 6 characters or more (up to 16 characters.)
2. Passwords must contain three (3) of the following criteria options:
- UPPER CASE, lower case, numeric, and/or special characters (!, $, etc.)
You may also enter a password hint, but it is not a mandatory field. The hint field can be useful in
providing a clue as to what the password is, should the password ever be forgotten. (Note: The hint
CANNOT be an exact match to the password.)
Document No. 480G3001-001.A06
Figure 7.3 – Password Setup
DataTraveler ® Locker+ G3 USB-to-Cloud Page 16 of 28