Kingston Technology DataTraveler Locker+ G3 Manuel D'utilisation page 10

USB   Cloud Initialization (Windows Environment)
Once the device has been initialized, the USB-to-Cloud
application will appear as seen in to the right.
Figure 3.7
Please make sure you have a working Internet connection
before you continue.
To proceed with the installation, click the green 'Accept'
button in the bottom right-hand corner of the clevX window.
To decline the installation, click the red 'Decline' button in the
bottom left-hand corner of the clevX window.
(Note: If you click the red 'Decline' button, it will cancel the
USB-to-Cloud installation. In doing so, a special text file
named 'USBtoCloudInstallDeclined.txt' is created on the data
partition. The presence of this file will prevent the application
from prompting you for the installation in the future.)
Figure 3.7 – USB-to-Cloud
If the following Windows Security Alert window pops up
during the initialization process, please click "Allow access" to
continue (or create a Windows Firewall Exception) in order
for the USB-to-Cloud application to continue.
Figure 3.8 – Windows Security Alert
Document No. 480G3001-001.A06 DataTraveler ® Locker+ G3 USB-to-Cloud Page 9 of 28