Publicité
Les langues disponibles
Les langues disponibles
English
• The unit must not be immersed in water. The installation site
must be protected from possible water leakage.
• Keep batteries out of the reach of children. Children can swal-
low batteries. If the battery compartment no longer closes
properly, do not continue to use the product and keep it away
from children. If a battery is swallowed, seek medical attenti-
on immediately.
• Batteries must not be exposed to heat. Aviod direct sunlight
and fire.
• Check batteries regularly to avoid battery leakage. Replace
with same battery type if necessary.
• The autofeeder must not be operated with rechargeable batteries.
• Before maintenance and cleaning work on the unit, please
remove the batteries first. Before working in the aquarium,
dismount the unit and put it safety to the side.
A
Function
a Housing cover b drive unit with battery compartment c push
button for manual feeding d programming buttons e container
cover f feed container g slider for feed dispensing h Velcro tape
as a fastener i Holder j Holder screw.
B
Setup
To insert the batteries (2 x "AA/LR6" size 1.5 V alkaline batteries), open
the housing cover by applying light pressure on the locking clip. Pay
atten-tion to the proper poling of the batteries.
Attention: do not use rechargeable batteries.
Closing the housing cover: Insert into the upper edge of the drive unit
and pivot downwards until the lock engages.
Changing batteries: If the symbol
that the batteries are almost empty. The feeding procedure will still be
carried out, but the batteries should now be replaced. After about 3
days, the entire display will blink and the device will shut off automat-
ically in order to prevent the feed container stopping in a downward
position.
LO
appears on the display, it means
- 13 -
Publicité
