Franke FSM 25 MW XS Manuel D'installation Et Mode D'emploi page 51

Operating instructions
1
2
1. Setting the clock
When the microwave oven is connected to the
power supply, "0:00" appears on the LED
display and the acoustic signal sounds.
1. Press "
2
the clock setting function; the hour digits on
the clock will start to flash.
2. Press one of the
hour digits, ensuring the numbers selected
are between 0-23.
3. Press "
minute digits on the clock will start to flash.
4. Press one of the
minute digits, ensuring the numbers
selected are between 0-59.
5. Press "
setting the clock. ":" will start to flash, and
the time will light up.
Note: 1. If the clock is not set, the time will not
GB-20
" twice to select
2
buttons to adjust the
" once; the
2
buttons to adjust the
" once to finish
be displayed.
2. During the clock setting procedure, if
" " is pressed, the oven
automatically reverts to its previous
status.