Create a self-signed certificate:
Country:
State or province:
City:
Organization:
Department:
Registered name:
Duration of validity:
Note: When using a "self-signed certificate", you may receive a warning message from your
browser. Self-signed certificates are always classified as insecure by the browser as the source
certificate and authorization of the certification authority are both absent.
Accept the settings by pressing "Save" or cancel them by pressing "Cancel".
IP filter
Specific IP areas can be authorized or blocked for camera access in this configuration menu:
IP filter:
Filter list:
Filter type:
Add:
Edit:
Delete:
Rule:
The IP filter function is only enabled with user type "Operator" or "Viewer". A user
with the "Administrator" user type always has access to the network camera.
Accept the settings by pressing "Save" or cancel them by pressing "Cancel".
You can use this button to create a self-signed certificate.
Country specification in 2-character code (e.g. DE)
Max. length of 32 characters (A–z, A–Z, 0–9)
Max. length of 32 characters (A–z, A–Z, 0–9)
Max. length of 32 characters (A–z, A–Z, 0–9)
Max. length of 32 characters (A–z, A–Z, 0–9)
Max. length of 32 characters (A–z, A–Z, 0–9)
Enter how long this certificate will remain valid here (0–1000).
Enable or disable the IP filter function.
List of all filters that have been set up as well as buttons for editing the filters.
Preselection of whether a filter should permit or block before it is defined
using the "Add" button.
Add a filter.
Edit a selected filter.
Delete a selected filter.
Individual IP: Definition of a filter for an IP address.
Network: Definition of a filter for a certain network.
Range: Definition of a filter for a certain IP address range.
105