Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 120
Safety information
1.
Power supply: Power supply unit 110-240 V AC, 50/60 Hz / 12 V DC, 1.5 A (included in the scope of
delivery)
Only operate this device on a power source which supplies the power specified on the type plate. If you
are unsure of the power supply at the installation location, contact your power supply company.
Disconnect the device from the power supply before carrying out maintenance or installation work.
2.
Overloading
Avoid overloading of electrical sockets, extension cables and adapters, as this can result in fires or
electric shocks.
3.
Cleaning
Only use a damp cloth to clean the device. Do not use corrosive cleaning materials.
Disconnect the device from the power supply while doing this.
Warnings
Observe all safety and operating instructions before putting the device into operation for the first time.
1.
Follow these instructions. Non-compliance with these instructions could lead to an electric shock.
Never open the housing or power supply unit during operation.
Do not insert any metallic or flammable objects into the device.
Use overvoltage protection to prevent damage caused by overvoltage (e.g. electrical storms).
2.
Disconnect defective devices from the power immediately and contact your specialist dealer.
When installing the device in an existing video surveillance system, ensure that all devices are
disconnected from the power supply and low-voltage circuit.
If in doubt, have a specialist technician carry out assembly, installation, and connection of the
device. Improper or unprofessional work on the power supply or domestic installation puts both
you and other persons at risk.
Connect the installations so that the power supply circuit and low-voltage circuit always run
separately from each other. They should not be connected at any point or be able to become
connected as a result of a malfunction.

Unpacking the device

Handle the device with extreme care when unpacking it.
If the original packaging has been damaged, inspect the device. If the device shows signs of
damage, return it in the original packaging and inform the delivery service.
65

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Tvip31501Tvip31551Tvip32500

Table des Matières