Optika Italy B-800 Serie Manuel D'instructions page 6

Unpacking
The microscope is housed in a moulded Styrofoam container. Remove the tape from the edge of the container
and lift the top half of the container. Take some care to avoid that the optical items (objectives and eyepieces)
fall out and get damaged. Using both hands (one around the arm and one around the base), lift the microscope
from the container and put it on a stable desk.
Assembling
Once you open the box, these are the microscope's components:
②
⑤
Put the microscope stand on a
solid table. Insert the optical
head above the attachment,
using the 2mm Allen wrench
to tighten the screw. (Fig.1)
③
④
Page 6
① Condenser
② Optical head
③ Main body
④ Eyepieces
⑤ Power supply
⑥ Stage
⑦ Objectives
⑦
⑥
①
Fig.1