Publicité
Les langues disponibles
Les langues disponibles
KEY LOCK
The key lock function is for blocking and setting the hob in a save mode during use. Setting a higher heat setting or other
alterations are not possible. It is only possible to switch the appliance off.
The key lock is activated when the key lock key
indicator for the key lock lights up and the controls are blocked.
TIMER FUNCTION
The timer function can be used in two ways: minute minder timer and cooking zone timer.
Minute minder timer
The minute minder timer can be operated without active cooking zones. Switch the hob on and press the TIMER key
display shows
. Set the desired time with the slider control
minutes. If there are no controls touched in 10 seconds, the minute minder time will be set and the dot will disappear. The time
runs down according to the setting.
When the time is over, a signal sounds and the timer display blinks. The sound signal will stop automatically after 30 seconds or by
operating any key.
To change the timer, press the TIMER key
Cooking zone timer
The cooking zone timer is connected to a cooking zone and can be set separately for each cooking zone. In contrast to the minute
minder timer the cooking zone timer switches off the cooking zone when the set time runs out.
• Switch on the hob and activate a cooking zone.
• Set the heat setting with the slider control
• Press on the TIMER key
• Press the TIMER key
there a four LED's. They indicate for which cooking zone, the cooking zone timer is set.
• Set the desired time with the slider control
• 10 seconds after the last control touch, the display will show the time of the cooking zone which runs out first (in case of
programming more than one cooking zone).
To set an extra cooking zone timer, do as follows:
• Activate another cooking zone.
• Set the heat setting with the slider control
• Press on the TIMER key
• Press the TIMER key
• Set the desired time with the slider control
• 10 seconds after the last control touch, the display will show the time of the cooking zone which runs out first (in case of
programming more than one cooking zone).
When the selected time has runs down, a signal sounds and the timer display shows [00]. The programmed cooking zone will be
switched off and [H] appears in the display if the cooking zone is hot.
The sound signal will stop automatically after 30 seconds or by operating any key.
SOUND SIGNAL
When the hob is in operation, the following activities will be signalled by means of a sound signal:
• normal key activation with a short sound signal
• continuous operation of keys over a longer period of time (10 seconds) with a longer, intermittend sound signal.
is pressed for 2 seconds. This activation is confirmed by a sound signal. The
again and change the time with the slider control
. The display shows
again until the corresponding LED blinks to activate the cooking zone timer. Around the timer display
. The timer will now function as a minute minder timer.
again until the corresponding LED blinks to activate the cooking zone timer.
. The range of the minute minder timer is between 0 to 99
.
. The timer will now function as a minute minder timer.
.
.
.
. The
.
25
English
•
Publicité
