Publicité
Les langues disponibles
Les langues disponibles
OPERATING INSTRUCTIONS
CONTROL PANEL
1. POWER BUTTON: Press to turn the air conditioner on or off.
2. ECO: Press to activate the energy saver feature. The fi lter light will illuminate after 250 hours of
operation. Press and hold for 3 seconds to reset the fi lter after cleaning.
3. FAN: Press to set the desired fan speed.
4. TEMPERATURE CONTROL BUTTONS: Press to change the set temperature. Press and hold the
temperature control buttons at the same time for 3 seconds to change the temperature scale being
displayed. The temperature can be set between 16 - 30°C (60 - 86°F).
5. DISPLAY PANEL: Shows the set temperature. While in fan mode, shows the room temperature.
6. MODE: Press to set the desired mode.
7. TIMER: Press to activate the timer feature.
8. SWING/WIRELESS CONNECT: Press to initiate the auto swing feature. Press again when the louver
reaches the desired angle. Press and hold for 3 seconds to activate the wifi feature.
2
1
3s
MODE
Press the mode button to choose the desired mode.
Auto
Auto mode will automatically set cooling or fan only
operation based on the current temperature in the
room. Fan speed cannot be adjusted in this mode.
Cool
Choose cool mode to set the cooling function.
Use the temperature control buttons to choose the
desired temperature. The fan speed can be adjusted
by pressing the fan button.
3
4
5
Dry
Choose dry mode to set the dehumidifying function.
Condensed water will drain out the back of the unit.
Fan speed cannot be adjusted in this mode.
Fan
Fan mode will run the internal fan without engaging
the cooling function. The fan speed can be adjusted
by pressing the fan button.
16
6
7
8
3s
Publicité
