Compatible Devices; Wireless Charging - Perel EFL60 Mode D'emploi

the warranty and the dealer will not accept responsibility for any ensuing defects or
problems.

Nor Velleman nv nor its dealers can be held responsible for any damage
(extraordinary, incidental or indirect) – of any nature (financial, physical...) arising
from the possession, use or failure of this product.

Keep this manual for future reference.
4. Overview
Refer to the illustrations on page 2 of this manual.
1
2
3
4
5
5. Operation

Compatible Devices


devices with a built-in wireless charging receiver

devices with a reserved wireless charging interface beside its battery

devices with a wireless charging receiver in its protection case
All devices must be compatible with wireless charging.
How to Use
Connect the appliance to the mains using a 5 V/2.5 A power supply (recommended, not
included) or use the included USB cable to power the lamp. The lamp is now ready-to-
use.

Wireless Charging

To charge your phone, just place it on the charging area. At this time, the charging
indicator will flicker to indicate that the phone is charging.
Another way to charge your device is to connect it to the micro USB output port of the
lamp.
V. 01 – 09/05/2019
5 V/2.5 A input (recommended)
USB output
charging area
power on-off
colour temperature
EFL60
6
7
8
9
4
increase
1 h
2 h
decrease
©Velleman nv