Medion LIFE MD 44030 Notice D'utilisation page 48

 Insert the cinch connection cord to the AUX IN connections on the back of the
device. Please note the colour markings and the L (left) and R (right) labels.
 Press the MODE button several times until you see AUX in the display.
The audio signal from your external device will now be played back.
The track playback and volume settings are controlled via the external
device.
14.2. Line out
You can connect an external amplifier (television, recording device, sound bar,
active speaker etc.) to the party speaker via the LINE OUT connection.
 Insert the cinch connection cord to the LINE OUT connections on the back of
the device. Please note the colour markings and the L (left) and R (right) labels.
When connecting an external amplifier via the LINE OUT connection,
you do not need to select a playback mode. The signal is output
constantly.
15. Troubleshooting
Problem
The device cannot be
switched on.
Possible cause
• The power cord is not
connected properly.
• The POWER switch is
OFF.
Remedy
 Ensure that the power
cord is properly
connected.
 Ensure that the
POWER switch on
the back of the party
speaker is switched
to the ON position.
If the party speaker still
cannot be switched on,
the appliance is defective.
In this case, contact our
service department.
DE
EN
FR
ES
IT
NL
49