Control Panel - Tecnodom VULCANO Série Manuel D'installation Et De Fonctionnement

EN | VULCANO | User and Maintenance Manual

6 CONTROL PANEL

Before the start-up, pay attention to the following instructions and safety norms!
34
EW 961 - EW 794
ATTENTION ! READ INSTRUCTIONS
UP
Press and release
Scrolls through menu items
Increases values
Press for at least 5 secs
Activates the Manual Defrost function
DOWN
Press and release
Scrolls through menu items
Decreases values
Press for at least 5 secs
Confi gurable function by user (par. H32)
STAND-BY (ESC)
Press and release
Returns to the previous menu level
Confi rm parameter value
Press for at least 5 secs
Activates the Stand-by function
(when outside the menus)
SET (ENTER)
Press and release
Displays alarms (if active)
Opens the Machine Status menu
Press for at least 5 secs
Opens the Programming menu
Confi rms commands
KEYS AND LEDs
SET / Reduced SET LED
Flashing:
Quick fl ashing: access to level 2 parameters
Off:
Compressor LED
Permanently on: compressor active
Flashing:
Off:
Defrost LED
Permanently on: defrost active
Flashing:
Off:
Fan LED
Permanently on: fans active
Off:
Alarm LED
Permanently on: alarm on
Flashing:
Off:
reduced set active
otherwise
delay, protection or
blocked start-up
otherwise
manual or D.I. activation
otherwise
otherwise
alarm acknowledged
otherwise