Publicité
EN | VULCANO | User and Maintenance Manual
1 VERTICAL MULTI-DECK DISPLAY
POSITIONING
Before to unload/download and positioning the Vertical Multi-deck Display inside the shop/
kitchen, you are kindly invited to read carefully this instruction manual especially the chapters re-
garding: unloading/loading, dimensions, weight, evaporating water basin, adjustable feet, electric connections and
maintenance procedures.
1.1 TRANSPORTATION
NO
1.2 DOWNLOAD - UNLOAD / LENGTHS / WEIGHTS
Kg
The manufacturer declines any responsibilities due to operations performed without adopting the abo-
ve safety precautions.
1.3 PACKING
At the delivery please check that the packing is intact and that during transportation no damage was
occurred. Remove the external carton-box; remove the fastener that keeps still the Vertical Multi-deck Display to
its pallet, put it in the correct position and then remove the adhesive white protection of the stainless steel.
The recovery and the recycling of the packing materials such us, plastic, iron, carton box, wood help the saving
of row material and reduce the waste. Please consult your area address book for disposal of materials and
authorized garbage dump.
1.4 POSITIONING AND FEET REGULATION
26
Do not superimpose Vertical Multi-deck Display packing (allowed only if
SI
there is wooden crate packing option).
We recommend you to transport the Vertical Multi-deck Display always in the
upright position (as mention on the packing). If the Vertical Multi-deck Display with
built in condensing unit was inclined during transportation we suggest you to keep
the product in the suggested upright position for at least 8 hours, before switching
Kg
it on. In this way, you will allow the oil to fl ow in all the components, lubricating
them again. Afterwards you can proceed with the start.
The unloading/loading procedures should be executed by pallet-jack or by forklift
driven by skilled and authorized staff. We decline any liability for failing to comply
with safety rules currently in force.
Before starting the unloading, positioning and installation procedures of the Ver-
tical Multi-deck Display inside the shop/kitchen according to the model of the
Vertical Multi-deck Display, please read carefully the information in the technical
data Appendix.
Place the Vertical Multi-deck Display in a perfect horizontal position, acting if necessary
on the screw type adjustable feet. Use a spirit level to check it. The Vertical Multi-deck
Display must be placed in order to operate properly and allow the correct defrost
condensate water draining. In this way you will avoid noisy vibrations of the condensing
unit. Check the correct positioning of the condensate water basin and its draining.
Publicité
Chapitres
