Télécharger Imprimer la page

Craftsman 580.676630 Mode D'emploi page 16

Publicité

Les langues disponibles

Les langues disponibles

OWNER'S RESPONSIBILITIES
Follow the hourly or calendar intervals, whichever occurs first.
More frequent service is required when operating in adverse conditions noted below.
MAINTENANCE SCHEDULE
MAINTENANCE TASK
PRESSURE WASHER
Check/clean water inlet screen
Check high pressure hose
Check detergent hose
Check spray gun and assembly for leaks
Purge pump of air and contaminants
Prepare pump for storage below 32°F
ENGINE
Check oil level
Clean debris
Change engine oil
Service air cleaner
Service spark plug
Service spark arrester
Clean cooling system
Clean combustion chamber
Prepare for storage
1
Clean if clogged. Replace if perforated or torn.
2
Change oil after the first (5) operating hours and every 50 hours or yearly thereafter. Change sooner when operating under dirty or dusty conditions.
Replace more often under dirty or dusty conditions.
3
GENERAL RECOMMENDATIONS
Regular maintenance will improve the performance and
extend the life of the pressure washer. See any Sears or
other qualified service dealer for service.
The pressure washer warranty does not cover items that
have been subjected to operator abuse or negligence. To
receive full value from the warranty, the operator must
maintain pressure washer as instructed in this manual
including proper storage as detailed in Storage.
Some adjustments will need to be made periodically to
properly maintain your pressure washer.
All service and adjustments should be made at least once
each season. Follow the requirements in the Maintenance
Schedule chart above.
NOTE: Once a year you should clean or replace the spark
plug and replace the air filter. A new spark plug and clean air
filter assure proper fuel-air mixture and help your engine run
better and last longer.
EMISSION CONTROL
Maintenance, replacement or repair of the emission control
devices and systems may be performed by any non-road
engine repair establishment or individual.
All manuals and user guides at all-guides.com
MAINTENANCE
OPERATING INTERVALS
Every 25
Every 50
Before
Hours or
Hours or
Each Use
Yearly
Yearly
X
1
X
X
X
X
See Winter Storage
X
X
X
2
X
3
X
If unit is to remain idle for longer than 30 days.
16
FILL IN DATES AS YOU COMPLETE
Every 100
100-300
Hours or
Hours
Yearly
X
X
2
X
BEFORE EACH USE
1. Check engine oil level.
2. Clean debris.
3. Check water inlet screen for damage.
4. Check in-line filter for debris.
5. Check high pressure hose for leaks.
6. Check cleaning tank for damage.
7. Check gun and nozzle extension assembly for leaks.
8. Purge pump of air and contaminants.
PRESSURE WASHER MAINTENANCE
Clean Debris
Daily or before use, clean accumulated debris from cleaning
system. Keep linkage, spring and controls clean. Keep area
around and behind muffler free from any combustible debris.
Inspect cooling air slots and openings on the pressure
washer. These openings must be kept clean and
unobstructed.
Cleaning system parts should be kept clean to reduce the risk
of overheating and ignition of accumulated debris.
Use a damp cloth to wipe exterior surfaces clean.
SERVICE DATES
REGULAR SERVICE

Publicité

loading