Black & Decker CS355 Mode D'emploi page 6

ENGLISH
10. Connect dust extraction equipment
If devices are provided for the connection of
dust extraction and collection facilities, ensure
that these are connected and properly used.
11. Do not abuse cord
Never carry the tool by its cord. Never pull the
cord to disconnect from the socket. Keep the
cord away from heat, oil and sharp edges.
12. Secure workpiece
Use clamps or a vice to hold the workpiece. It is
safer and it frees both hands to operate the tool.
13. Do not overreach
Keep proper footing and balance at all times.
14. Maintain tools with care
Keep cutting tools sharp and clean for better
and safer performance. Follow instruction for
lubricating and changing accessories. Inspect
tool cords periodically and if damaged have
them repaired by an authorized service facility.
Inspect extension cords periodically and replace
if damaged. Keep handles dry, clean and free
from oil and grease.
15. Disconnect tool
Switch off and wait for the tool to come to a
complete standstill before leaving it unattended.
Unplug the tool when not in use, before
changing any parts of the tools, accessories or
attachments and before servicing.
16. Remove adjusting keys and wrenches
Always check that adjusting keys and wrenches
are removed from the tool before operating the
tool.
17. Avoid unintentional starting
Do not carry the tool with a finger on the switch.
6
All manuals and user guides at all-guides.com
Be sure that the tool is switched off before
plugging in.
18. Use outdoor extension cables
Before use, inspect the extension cable and
replace if damaged. When using the tool
outdoors, only use extension cables intended for
outdoor use and marked accordingly.
19. Stay alert
Watch what you are doing, use common sense
and do not operate the tool when you are tired.
20. Check for damaged parts
Before use, carefully check the tool and mains
cable for damage. Check for misalignment and
seizure of moving parts, breakage of parts,
damage to guards and switches and any other
conditions that may affect its operation. Ensure
that the tool will operate properly and perform its
intended function. Do not use the tool if any part
is damaged or defective. Do not use the tool if
the switch does not turn it on and off. Have any
damaged or defective parts replaced by an
authorised Black and Decker repair agent. Never
attempt any repairs yourself.
21. Warning!
The use of any accessory or attachment or
performance of any operation with this tool other
than those recommended in this instruction
manual may present a risk of personal injury.
22. Have your tool repaired by a qualified
person
This tool is in accordance with the relevant safety
regulations. Have your tool repaired by an
authorised Black and Decker repair agent.
Repairs should only be carried out by qualified
persons using original spare parts; otherwise this
may result in considerable danger to the user.