Nilfisk S2 Manuel D'instructions page 30

S2 - S3
Symbol Indicator signal
Low compressor
bar/psi
MAX
Max. vacuumed
material level
bar/psi
MAX
Primary filter
Absolute filter
(class H models)
At the end of a cleaning session
■ Turn off the machine and remove the plug from the socket.
■ Wind up the connection cable.
■ Empty the container and clean the machine as described
in the "Maintenance, cleaning and decontamination"
paragraph.
■ Wash the container with clean water if aggressive
substances have been vacuumed.
■ Store the machine in a dry place, out of reach of
unauthorised people.
■ Lock the castor brakes.
■ During transport and when not using the machine, close
the vacuum inlet with the relevant plug (if equipped).
I
GB
F
D
E
C343
Indicator Vacuum cleaner state
colour
MAX
Check the compressor
Red
pressure is functioning properly (if
Empty the container
Red
Use the primary filter
shaker after stopping
Red
the vacuum cleaner (on
models with a manual
Change absolute filter
Red
and procedure
Vacuum stopped.
installed).
Vacuum stopped.
(see relevant
paragraph).
Vacuum on.
filter shaker).
Vacuum on.
(see relevant
paragraph).
10