Before using the scooter
Before driving the scooter, keep in mind that improper and reckless use
of it could cause loss of control and for this reason we recommend
reading the following points:
It is very important to check that the parts and components of the
scooter are properly adjusted and installed.
Make sure the brakes are in good condition and working properly.
Make sure that the mechanism to fold the scooter is properly fixed.
Make sure the battery has enough charge.
If any part and/or component is not adjusted, be sure to adjust.
Make sure to use the scooter in open spaces, either outdoors or
indoors.
You must be aware of your surroundings. Make sure you are not
distracted, whether by vehicles, pedestrians, bicycles, or obstacles.
It is recommended to use the scooter together with another
experienced person, who is familiar with driving the scooter and the
instructions (User's Manual).
Sandy, slippery and/or wet surfaces should be avoided.
Be sure to wear a helmet and personal protective equipment (gloves,
knee pads, elbow pads, etc.).
Wet environments will hinder braking action and it is
recommended to dry the surface of the brake disc.
Adverse conditions such as rain, snow, ice should be
NOTE
avoided.
If you use the scooter in any type of environment, check the
brakes frequently.
E-scooter operation
When turning on the scooter, the screen will light up indicating that it
is on. Then check the driving modes, which regulate speed.
Avoid sudden starts and stops, failure to do so will shorten battery life.
In case of emergency stops, press both levers (front/rear brake) and
this will also cut off the power supply to the motor. The maximum
speed of the scooter is 25 km/h. When using the scooter at night, make
sure to turn on the LED lights (front/rear).
19