Levolor Cellular Shades Manuel D'installation, Fonctionnement, Entretien page 5

GETTING STARTED
INSTALLATION OVERVIEW
•
Your order will include the correct number
of installation brackets for your shade
width, as shown in the table.
Bracket End Mount Brackets
INSIDE MOUNT (IM)– BEFORE YOU BEGIN
PAIR SHADE BEFORE INSTALLING
REMOTE CONTROL
•
Use the – and + buttons to select the channel
to pair to.
•
Press and hold the programming button on the
window covering for about 2 seconds until the
shade jogs once.
•
In the next 10 seconds, press and hold the  on
the remote until the shade jogs twice.
USING THE INMOTION APP
•
If you purchased a hub, download the LEVOLOR
InMotion app to get started.
™
•
Shade can be directly paired to app, but it is
recommended to pair to remote first.
8
Cellular Shades Motorized Control Lift
Shade Brackets
Width Required
Up to 36" 2
36" – 72" 3
72" – 108" 4
108" – 120" 5
Standard Top-Down/Bottom-Up,
Remote Control Day/Night Remote Control
Programming
Button
Micro-USB
Charging Port
Indicator
Light
INSIDE MOUNT (IM)
Bracket
Bracket
STEP 1: MARKING THE BRACKET LOCATIONS
•
Mark 2" in from each jamb for bracket location.
— If more than two installation brackets came with your order, space additional
bracket(s) evenly between the two end brackets.
— Mount into wood whenever possible.
WINDOW SIDE
2" Space Evenly
Jamb
•
Center the brackets on your marks, then mark each of the screw holes.
— The minimum depth for installation brackets is 11/4".
— The minimum depth for a fully recessed mount is 21/4".
— Use the center screw hole when depth permits.
— Use both winged screw holes with shallow mounting depths.
IMPORTANT: Brackets must be level and aligned to each other.
INSTALLATION
Space Evenly 2"
Jamb
ROOM SIDE
Cellular Shades Motorized Control Lift
9