On/Off Switch - Palmer GAMK2 Manuel D'utilisation

ON/OFF SWITCH

3
Switch on the device before you switch on the connected powered loudspeakers and power amplifiers,
and switch it off after you have switched off the connected powered loudspeakers and power amplifiers.
INPUT L/R
4
Balanced stereo line input with female 3-pin XLR connectors. The line inputs on the front and back are
wired in parallel. Alternate using the inputs (either front or back).
LINK OUTPUT L/R
5
Balanced stereo line output with male 3-pin XLR connectors. When up to three devices are cascaded, use
the line output to transmit the input signal.
NETWORK CONNECTOR
6
Network connector for controlling the device with the browser-based app (minimum display resolution:
1024 × 768). For wireless connection, a WLAN router with a connection for each loudspeaker switching
device is required. The WLAN router is not included in the scope of delivery.
RESET
7
The reset button is recessed to prevent accidental operation. Briefly press the button to reset the network
settings. To factory reset the device, press the button until the device restarts (MAIN/CHANNEL VOLUME LED
ring on the front shows a rotating animation.) The device's firmware version remains unchanged. Brows-
er-based app: A factory reset will delete all previously added users, reset the username (USER) to admin,
and also reset the corresponding password to admin.
USB PORT
8
USB connection with type A socket for connecting a USB storage medium (USB stick). Audio files stored on
the USB stick can be played with the internal audio player that is controlled with the browser-based app (a
direct Ethernet connection or a WLAN router connection is required; supported audio formats: mp3, ogg,
flac, wav, aiff; recommended file system: FAT32).
SERVICE
9
Micro USB port. Only for servicing purposes.
13
10
LOUDSPEAKER OUTPUT 1–16
10
Balanced line outputs for connecting powered loudspeakers and power amplifiers (male 3-pin XLR
connectors). The web-based app can be used to configure the outputs in pairs in stereo (Output 1/2, 3/4,
etc.) or individually in mono. In the mono configuration, a stereo signal that is fed to the line input or is that
reproduced by the internal player is automatically mono summed.
OUTPUT SUBWOOFER A–H
11
Balanced line outputs for connecting powered subwoofers and power amplifiers (male 3-pin XLR connec-
tors). A stereo signal that is reproduced by the internal player or that is fed to the line input is automatically
mono summed.
INPUT L/R
12
Balanced stereo line input with female 3-pin XLR connectors. The line inputs on the front and back are
wired in parallel. Alternate using the inputs (either front or back).
14
15
12
11
7