Cabling/Wiring Example; Connections, Control, And Display Elements - Palmer GAMK2 Manuel D'utilisation

CABLING/WIRING EXAMPLE

CONNECTIONS, CONTROL, AND DISPLAY ELEMENTS

4
5
LINE VOLTAGE SELECTOR 115/230
1
Check the switch for setting the operating voltage before connecting the device to the power supply. The
line voltage of your energy supply and the operating voltage of the device must be the same. If they are
different, put the switch in the position corresponding to your energy supply's line voltage (115 V or 230 V).
POWER SOCKET AND FUSE HOLDER
2
IEC power socket with integrated fuse holder. A suitable power cable is included in delivery.
IMPORTANT NOTE: Only replace the fuse with a fuse of the same type. Please observe the inscription on
the housing, and use a fuse that corresponds to your energy supply's power supply voltage. If a fuse trips
repeatedly, please contact an authorized service center.
6
7 8 9
6
Music player
1
3
2