Palmer GAMK2 Manuel D'utilisation page 13

MAIN
Control over the main volume of all line outputs, including the cascaded units. Swipe or use the mouse to
move the virtual fader to the desired volume position. You can also use the keyboard to enter the value
you want directly in the input field next to the virtual fader. Press Enter ( ) to confirm your selection. The
digits below the virtual fader are level display fields. They are highlighted in different colors as soon as an
audio signal reaches the corresponding level (-30 to +10 = green / +15 = yellow / +20 = red, reduce level to
prevent distortion).
MAIN MUTE
Click the loudspeaker symbol to mute the main signal and again to unmute it. The
loudspeaker symbol is highlighted in orange if the mute function is on and gray if
it is off.
SELECT MODE
SINGLE (button is orange when activated): A maximum of only one mono or stereo
line output of channels 1 to 16 plus one output of channels A to H can be activat-
ed. The mono or stereo channels 1 to 16 form the first independent group and the
mono channels A to H the second independent group. The previously activated
channel will automatically deactivate upon activating another channel in the
same group.
MULTI (button is orange when activated): All outputs can be activated and
deactivated as required.
AUDIO PLAYER
The integrated audio player supports the following audio formats: mp3, ogg, flac, wav, and aiff. Connect a
USB storage medium (USB stick, recommended file system: FAT32) with audio files stored on it to the USB port
on the back of the device. Information on the player's display fields and buttons is provided in the following
figure ("Repeat current title" only in connection with "Repeat all titles").
Elapsed time
Scroll bar
Shuffle
Song title
Previous title Play /
Pause
Time remaining
Repeat current title
Repeat all titles
Next title
Unmute Mute
13