Channels - Palmer GAMK2 Manuel D'utilisation

OUTPUT
3
Configure the balanced XLR outputs 1 to 16 as stereo outputs (CH 1/2 to CH 15/16) or mono outputs (CH 1
to CH 16).
NETWORK
4
Setting of the IP address, subnet mask, default gateway, and domain name server. Change & Restart must
be clicked to confirm a change of settings. The device will then restart.
LINKED GRAND AUDITIONS
5
Up to three Grand Audition MK2 devices can be cascaded together and controlled with the brows-
er-based app. The settings for the first slave unit (First Slave) are made under FIRST SLAVE IP ADDRESS (IP
address of the first slave unit) and TOP CHANNELS (STEREO/MONO). The settings for the second slave unit
(Second Slave) are made under SECOND SLAVE IP ADDRESS (IP address of the second slave unit) and TOP
CHANNELS (STEREO/MONO).

CHANNELS

Click the CHANNELS tab to open the window for activating and deactivating channels. The factory default
is that the group with the mono or stereo channels uses numbers (CH 1 to CH 16 or CH 1/2 to CH 15/16),
and the second group with the mono channels uses letters (CH A to CH H). The channels, however, can be
individually labelled (see VOLUMES tabs). A dividing line visually separates the channel groups. If necessary,
scroll up or down to view the desired channels. Click the corresponding button to activate or deactivate
the desired channel. An activated channel's button is highlighted in orange.
15