Publicité
ENGLISH
3. OPERATION
Upright Vacuum Cleaner
Turn on the device by pressing the power button.
Press the suction power button to select the desired power level.
Handheld vacuum cleaner
To clean tables, furniture and car seats, press the handheld vacuum cleaner release button to
remove the handheld vacuum cleaner.
Press the handheld vacuum cleaner power button to activate it.
Assembling 2-in-1 accessory
To clean corners or other narrow spaces or difficult objects, the 2-in1 accessory can be fitted
into the handheld vacuum cleaner suction nozzle. Select the desired accessory and place it in
its place.
Fig. 4
Assembling the mop cloth
Open the water tank lid, fill it with water and close it properly again.
Assemble the water tank and attach the cloth.
Operate the device normally to vacuum and mop the floor.
It is recommended to moisten the mop cloth with water in order to achieve more uniform
scrubbing results.
Fig. 5
Along with water, you can use a small amount of non-abrasive and non-dense liquid.
4. CLEANING AND MAINTENANCE
Emptying and cleaning the dust tank and filter
Take the handheld vacuum cleaner out.
Remove the dust tank by pressing the release button and turning the tank.
Pull the filter out and empty the dust tank.
The dust tank and the filter can be rinsed with warm water. Make sure all the parts are
completely dry before reassembling them.
Fig. 6
Cleaning the main brush
If the brush becomes blocked or tangled, the device's performance will be affected. In this
case, clean the brush.
Open the brush compartment.
Fig. 7
22
All manuals and user guides at all-guides.com
Take the main brush out by pulling from it and clean it.
It is suggested to clean the brush after each use.
Cleaning the wheels
To prevent the wheels from blocking and from wearing off, it is suggested to clean them after
each use.
Use a screwdriver to unscrew the wheels and take them out of their compartment.
Remove any dirt stuck to them or to their axes.
Insert the wheels in their compartment and press them down to assemble them back.
Cleaning of the water tank (optional) and the mop
After each use:
Remove the mop and clean it. Make sure it is completely dry before using it again
Clean and rinse the water tank.
In case the mop cloth is very used, replace it by a new one.
Fig. 8
Replacing the battery
The battery is a consumable part which can wear off with use and time. If it is damaged or
wears off, contact the Technical Support Service of Cecotec. The battery is not removable.
5. TECHNICAL SPECIFICATIONS
Product reference: 05711
Product: Conga PopStar 4070 H20
Battery: 40,7 V, 2200 mAh Li-ion
220-240 VAC ~ 50/60 Hz
Made in China | Designed in Spain
6. DISPOSAL OF OLD ELECTRICAL APPLIANCES
The crossed out "wheeled bin" symbol on the product reminds you of your obligation to dispose
of the appliance correctly.
The European directive 2012/19/EU on Waste Electrical and Electronic
Equipment (WEEE), specifies that old household electrical appliances must
not be disposed of with the normal unsorted municipal waste. Old appliances
must be collected separately, in order to optimise the recovery and recycling
of the materials they contain, and reduce the impact on human health and
the environment.
ENGLISH
23
POPSTAR 4070 H2O
Publicité
