Lux Tools B-53 HMA/A Notice Originale page 45

All manuals and user guides at all-guides.com
Rasenmaeher_480128.book Seite 45 Dienstag, 12. April 2016 10:02 10
Error/Fault
The motor operates with inter-
ruptions
The motor does not reach the
maximum speed
If you can't fix the fault yourself, contact your
nearest vendor. Please be aware that any
improper repairs will also invalidate the war-
ranty and additional costs may be incurred.
Technical data
Item number
Motor
Cubic capacity
Max. motor output**
Max. motor speed
Tank volume
Motor oil volume
Sound power level (L
WA
Sound pressure level
(L )*
PA
Vibration
Working width
*) The specified values are emission values and do not necessar-
ily represent safe workplace values. Although there is a corre-
lation between emission and immission levels, this cannot be
used to infer whether additional safety measures are necessary
or not. Factors which affect the current immission levels at the
workplace, include the type of room, other sources of noise,
e. g. the number of tools being operated and other processes
taking place in the vicinity. Permitted workplace values can dif-
fer from country to country. This information is designed to help
the user to better assess the dangers and risks.
**) Max. motor power of the moter according to the details pro-
vided by the manufacturer. Motor power can vary depending
on the use of motor, measured at 3060 rpm.
Cause
Excess fuel in the combustion
chamber?
Spark plug contaminated?
Gap between the electrodes
on the spark plug is too large?
Incorrect fuel?
Is the spark plug defective?
Cold start lever set to the
wrong position?
Is the air filter soiled?
Spark plug contaminated?
Gap between the electrodes
on the spark plug is too large?
Incorrect fuel?
480 128
4-stroke petrol
motor/B&S 675
190 cm³
2,49 kW
-1
2800 min
1000 cm³
600 cm³
)* 93 dB(A)
(K = 2,14 dB(A))
84 dB(A)
(K = 3 dB(A))
7,4 m/s²
(K = 3 m/s²)
530 mm
GB
Remedy
Remove the spark plug, dry
the electrode and start the mo-
tor.
Clean the spark plug.
Set the gap to 0.7-0.8 mm.
Empty the tank and fill with the
correct fuel.
Replace the spark plug.
Check the position.
Clean the air filter.
Clean the spark plug.
Set the gap to 0.7-0.8 mm.
Empty the tank and fill with the
correct fuel.
45