Samsung DA-E670 Manuel D'utilisation page 30

sOftWare UPgraDe (OnLy UsB MODe)
1. Visit www.samsung.com.
2. Click SUPPOrt on the top right of the page.
3. Enter the product's model number into the search field, and then click Find
Product.
4. Click get downloads in the Center of the page below the Downloads
header.
5. Click Firmware in the Center of the page.
6. Click ZiP file icon of the upgrade file.
7. Once popup window appears, click OK and continue to download and save
upgrade file onto your PC.
8. Uncompress downloaded .zip file into a certain folder of your PC.
9. Copy all files in the folder to the USB flash drive's root directory.
• Upgrading allows only one file set for upgrading at a time.
10. Press the
button on the top panel of the Wireless Audio with Dock
repeatedly until the icon appears in the display. Insert the USB drive into
the USB port on the back panel of the unit.
11. The LED will blink during the Software update process. The product will turn off automatically after completing
the firmware upgrade.
• It may take longer depending on the functions to upgrade. (Maximum 10 minutes)
• Turn on the product again.
▪
Do not disconnect the power or remove the USB drive while an upgrade is being applied. The main unit
will turn off automatically after completing the firmware upgrade.
▪
When software is upgraded, settings you have made will return to their default (factory) settings.
We recommend you write down your settings so that you can easily reset them after the upgrade.
▪
If the firmware fails to upgrade, we recommend formatting the USB drive in the FAT16 format and then
trying again.
▪
For upgrading purposes, do not format the USB drive in NTFS format. It is not a supported file system.
▪
Depending on the manufacturer, the USB may not be supported.
▪
Disconnect the Wireless Audio with Dock from the Internet and any external devices before you upgrade
the software.
▪
You cannot charge other external devices through this USB port.
▪
Refer to the Upgrade Guide from the website.
30
DOCK
LAN
DC 14V 4A WPS/ AUX IN ONLY FOR
SERVICE
RESET
USB 5V 500mA
LAN
ONLY FOR
DC 14V 4A WPS/ AUX IN
SERVICE
RESET
USB 5V 500mA
LAN
DC 14V 4A WPS/ AUX IN ONLY FOR
SERVICE
RESET
USB 5V 500mA
LAN
DC 14V 4A WPS/ AUX IN ONLY FOR
SERVICE
RESET
USB 5V 500mA
PUSH
PUSH