Samsung DA-E670 Manuel D'utilisation page 14

cOnnecting an aUDiO DeVice Using aUX in
This section explains how to connect the unit to an audio device.
This unit is equipped with one audio analog jack for connecting an audio device.
DC 14V 4A WPS/
RESET
DC 14V 4A WPS/
RESET
DC 14V 4A WPS/
RESET
AUX IN
DC 14V 4A WPS/
RESET
AUX in
1. Connect AUX IN (Audio) on the back of the unit to the earphone jack of the external device or audio device.
2. Press the
button repeatedly until the function LEDs are off.
• The AUX mode is active when no function LED is lit.
▪
Before moving or installing this product, be sure to turn off the power and disconnect the power cord.
14
PUSH
LAN
AUX IN ONLY FOR
SERVICE
USB 5V 500mA
PUSH
LAN
ONLY FOR
AUX IN
SERVICE
USB 5V 500mA
LAN
DC 14V 4A WPS/ AUX IN ONLY FOR
SERVICE
RESET
USB 5V 500mA
PUSH
LAN
AUX IN ONLY FOR
SERVICE
USB 5V 500mA
PUSH
LAN
AUX IN ONLY FOR
SERVICE
audio cable
USB 5V 500mA
LAN
ONLY FOR
DC 14V 4A WPS/ AUX IN
SERVICE
RESET
USB 5V 500mA
PUSH
Earphones
jack
external device
PUSH