Télécharger Imprimer la page

Samsung DA-E670 Manuel D'utilisation page 19

Lecteur audio sans fil avec station d'accueil
Masquer les pouces Voir aussi pour DA-E670:

Publicité

Les langues disponibles

Les langues disponibles

to connect the Wireless Audio with Dock using a WPS Pin
1. Press the
button on the top panel of the Wireless Audio with Dock repeatedly until the
icon appears in the display.
• Each time you press the button, the selection changes as follows :
;
; ;
;
The indicator changes from white to red and blinks.
2. Press and hold the WPS/reSet button on the back panel with a pen tip or similar item for more
than 5 seconds. The indicator blinks in white once. Wait until the indicator blinks in white twice
more, and then release the WPS/reSet button.
• The icon blinks in red, and then stops blinking and glows in red when the unit accesses the
Network Setting mode.
3. To connect the Wireless Audio with Dock to the network, search for "Samsung W_Audio e670
XXXXXXX" in the Wi-Fi Setting list of your WI-Fi device, and then select it.
ex) Samsung Galaxy Device
4. Open the web browser of the Wi-Fi device, and then type "http://192.168.1.1" into the address bar
of the Internet browser.
5. Press or touch Samsung Wireless Audio with Dock Status.
6. The WPS Pin number appears on the bottom of the
screen. Note or write down the number, and then turn the
Wireless Audio with Dock unit off and then on.
7. Access the Wi-Fi set-up page of your AP (wireless router or
modem) using your PC or other Internet ready device, and
then set the Wi-Fi settings to the PIN method. Refer to the
user's manual of your router or modem for instructions.
8. Type the Wireless Audio with Dock's WPS PIN number into
the appropriate field of the Wi-Fi setup page.
9. Press and hold the WPS/reSet button on the back panel
of the Wireless Audio with Dock with a pen tip or similar item for more than 10 seconds in the
or
mode. The indicator blinks once in white, and then twice. Wait until the indicator blinks three
times, and then release the button.
• The icon blinks in red.
10. If the connection between the Wireless Audio with Dock and the AP is completed within 90
seconds, the indicator changes from red to white.
• The Wireless Audio with Dock connection is complete.
The Wi-Fi Direct function is not supported by this product.
Direct connection may succeed in some cases, but it is not supported function by this
product.
;
; aUX (LeD Off)
or
6
19

Publicité

loading