Bosch AKE 35-19 S Notice Originale page 27

OBJ_BUCH-1238-001.book Page 27 Friday, April 30, 2010 9:39 AM
Always ensure all handles and guards are
fitted when using the machine. Never at-
tempt to use an incomplete machine or one
fitted with an unauthorized modification.
It is recommended that the first time user
should have practical instruction in the use of
the chainsaw and the protective equipment
from an experienced operator. The initial prac-
tice should be cutting logs on a saw horse or
cradle.
Always wait until the machine has come to
a complete stop before placing it down. The
tool insert can jam and lead to loss of control
over the power tool.
Never use the machine with a damaged ca-
ble. Do not touch the damaged cable and
pull the mains plug when the cable is dam-
aged while working. Damaged cables in-
crease the risk of an electric shock.
Functional Description
Read all safety warnings and all in-
structions. Failure to follow the
warnings and instructions may re-
sult in electric shock, fire and/or se-
rious injury.
Intended Use
The power tool is intended for sawing wood
such as wooden beams, planks, branches, tree
trunks, etc., and for sawing of trees. Cuts can be
sawed with or across the grain.
This power tool is not suitable for sawing miner-
al materials.
Delivery Scope
Carefully remove the machine from its packag-
ing and check if the following parts are com-
plete:
– Chain saw
– Cover
– Chain
– Chain bar
– Chain guard
Bosch Power Tools
– Saw chain oil (80 ml)
– Operating instructions
When parts are missing or damaged, please con-
tact your dealer.
Product Features
The numbering of the product features refers to
the illustration of the machine on the graphics
page.
1 Rear handle
2 On/Off switch
3 Lock-off button for On/Off switch
4 Oil filler cap
5 Activation lever for kickback brake (hand
guard)
6 Deactivation mark "for kickback brake"
7 Front handle
8 Serial number
9 Nose sprocket (AKE 35-19 S/AKE 40-19 S)
10 Chain guard
11 Saw chain
12 Chain bar
13 Gripping teeth
14 Chain-tensioning ring (red)
15 Locking knob
16 Cover
17 Symbol for rotation and cutting direction
18 Drive sprocket
19 Oil outlet
20 Guide fin for chain bar
21 Fastening bolt
22 Chain catch bolt
23 Chain tensioning catch
24 Power plug**
25 Extension cable*
26 Oil level gauge
27 Ventilation slots
28 Red dot
29 Protective lid of chain-tensioning mecha-
nism
** country specific
*Accessories shown or described are not part of the
standard delivery scope of the product. A complete
overview of accessories can be found in our acces-
sories program.
F 016 L70 667 | (30.4.10)
English | 27