ECG MTD 2072 SE Mode D'emploi page 58

INSTALLING THE MICROWAVE OVEN
Parts and features
Unpack the oven and all accessories.
The oven comes with the following accessories:
Glass turntable
Assembled support
Operating manual
2
GB
1 Safety lock system
(Switches off power if the door is opened while cooking)
2 Oven door view window
3 Assembled support
4 Control panel
5 Waveguide
6 Glass turntable
INSTALLATION
Remove all packaging material and take out all accessories.
Make sure the oven is not damaged in any way (dented or damaged door etc.). Do not install the microwave oven if damaged.
Kitchen worktop
Oven body: Remove all protective foil from the oven surface.
Do not remove the light brown foil, screwed to the inside of the
oven. This foil protects the oven magnetron.
Installation
1. Place the oven on a flat surface with a sufficient amount of space
around the appliance to ensure the proper function of exhaust
vents.
The minimum distance between the oven and the closest wall must
be 7.5 cm.
At least one side must be open space.
a) Leave at east 30 cm of free space above the oven.
b) Do not remove oven legs.
c) Do not block exhaust vents. Blocking the exhaust vents could cause damage.
d) Place the oven as far away from the radio or television as possible.
The microwave oven can interfere with the television and radio signal.
2. Connect the oven to a standard electricity network. Make sure the voltage and frequency on the oven label corresponds with the
network voltage and frequency.
ATTENTION: Do not install the oven above or near the kitchen stove, or near another source of heat. Placing the oven
by a heat source could damage the oven and result in losing the warranty. The microwave oven should be used in an
open space and should not be placed in a cabinet.
The surface of the microwave oven can become hot during operation.
58
1
1
1
6 5
4
3
1
1
7
6
5
qg
3
30 cm
7.5 cm
Opening
7.5 cm
1 Memory
2 Pause/Cancel
3 Menu/Time/Weight
2
4 Start/Quick start
5 Low
8
9
6 Auto Defrost
q;
7 Medium Low
qa
8 Medium
9 Medium High
qs
10 High
qd
11 Clock
qf
12 Preset
13 Speed Defrost
14 Save Power
4 15 Deodorization
Hot surface!