Landing Gear Removal - Horizon Hobby UMX A-10 Thunderbolt II Manuel D'utilisation

EN

Landing Gear Removal

The landing gear may be left installed or removed
to suit your flying area. We recommend using the
landing gear when you can take off and land from
a smooth surface. If you have long grass you may
choose to remove the landing gear, in which case you
will need to hand launch the aircraft and belly land.
1. Carefully pull the gear straight out of the
retainer clip that secures it into the fuselage.
When needed, assemble in reverse order.
When the landing gear is reinstalled, make sure the
nose gear is angled forward as shown.
8